TCT 3 Flute Router Bits Straight

TCT 3 Flute Router Bits Straight, made of tungsten steel, has high hardness, high wear resistance, high strength, bending resistance, Anti-breakage and other characteristics.

Specification

Material: tungsten carbide

Tool shank diameter: 1/2" = 12.7mm

Cutting diameter: 6mm 8mm

Shape: 3 grooves, 3-edge composite, 3-edge chip breaker

Suitable for: wood, medium density fiberboard, multi-layer board, particle board, acrylic, PVC, nylon, resin, plywood.

Used for: Grooving Cutting Drilling Trimming Fine engraving and cutting.

Feature

1. Precision processing with high-precision equipment;

2. It has good milling performance and ensures high efficiency;

3. High hardness, wear resistance, high strength; resistant to bending;

4. Large chip removal space and low resistance; smooth chip removal, low heat generation, and reduced pollution;

5. The cutting edge is sharp, reducing the cutting force, reducing the breakage rate, and improving the hole wall quality.

Precautions

1. When cutting and grooving, you must stay away from the visible area of the chisel edge. This is one of the most important safety precautions.

2. You cannot use the tool in any way you think is appropriate.

3. This tool can process a variety of woods, including hardwood, softwood, synthetic boards and other forms of wood, and can obtain a smooth surface. But it cannot be used to process metallic materials (such as copper or iron) or non-wood materials (such as sand or stone). Processing of these types of materials should be avoided.

4. After the tool is clamped, if bounce is found during work, the tool should be stopped immediately and clamped several times to ensure that there is sufficient contact between the tool handle and the jacket before using the tool. If you find that the tool bounces during operation, you should stop the tool and then continue operation.

5. When working, you need to wear necessary protective equipment to ensure that your eyes and hearing are protected.

6. Note that your body, clothing, and any other personal items you may have should not come into contact with the operating equipment. Also include keeping hands and feet away from the machine.

Hot Tags: tct 3 flute router bits straight, China tct 3 flute router bits straight manufacturers, suppliers, factory