Knowledge

Generally, ferrous metals mainly include steel. There is a large amount of carbon in these materials. It can be said that ferrous metals are carbon-loving materials, and diamonds a

Suitable. When cutting ductile iron, diamond-coated tools can reduce tool wear, extend the service life of the tool, and improve processing efficiency and product quality, so they

The main materials processed by diamond tool precision cutting include: * Hard metal materials, such as stainless steel, titanium alloy, high temperature alloy, etc. * Non-metallic

1. Diamond cutting tools have extremely high hardness and wear resistance: Diamond is the hardest substance found in nature. 2. Diamond cutting tools have a very low friction coeff

1. Processing of difficult-to-process non-ferrous metal materials When processing non-ferrous metals such as copper, zinc, aluminum and their alloys, the materials tend to adhere t

Before selecting and using diamond-coated tools, users must understand the following common sense about diamond-coated tools: The difference between coatings Amorphous diamond (als

1. Diamond tools cannot be used to process hardened steel. Diamond is made of carbon atoms. When certain materials are heated, they pull carbon atoms out of the diamond and form ca

1. Double-edged milling cutters have high cutting efficiency, but due to differences in cutting angles and cutting heights between the two edges, the machined surface is slightly p

1. First, turn off the power to the tool to prevent accidental injury. Using an adjustment tool, loosen the tool retaining bolt or clamp so the blade can rotate freely. 2. Secondly

1. Frequently Asked Questions: 1) Teeth chipping; 2) Paste; 3) The tightness of the finger joint fit varies. 2. Solution: 1) The finger joint teeth of overall finger joint knives a

1. The influence of the inner hole and outer diameter of the finger jointing knife on the finger jointing If the inner hole tolerance of the finger joint knife exceeds the toleranc

1. To grind finger-joint knives, you should use a professional grinding wheel (500#) for grinding finger-joint knives. It is not recommended to use a grinding wheel for grinding sa